The HomePod is not responding and this can be due to different reasons. Is your HomePod not responding to voice commands (e.g. “Hey Siri” or “Hey Siri, stop”) or even blinking on HomePod plus and minus. So today in this article we will explain the reasons why homepod not responding.
◆ Reasons why homepod not responding?
HomePod not responding to “Hey Siri” or “Stop”
Since Apple ‘s voice control is constantly being updated, recognition still fluctuates a lot. Sometimes the recognition is very good, sometimes you have the feeling that Siri no longer understands you at all. But sometimes you can do something yourself. It often helps if you deactivate Siri recognition and turn it on again.
HomePod plus minus blinks
It looks a little less trivial if your HomePod plus minus flashes or pulses. Users report in the Apple forum that this condition appeared suddenly and nothing helped. The HomePod isn’t responding and possible reboots or resetting the device didn’t help. Apple advised these users to take the device to an Apple Store. The devices were exchanged there.
Check the status
If HomePod isn’t responding or isn’t responding, the first thing to do is check the status of the device. Apple has both provided the ability to display a warning message in the Home app and sometimes it seems that the WLAN is no longer connected.
Is HomePod connected to WiFi ?
Have you recently changed your WiFi password or changed the location of your HomePod, requiring it to connect to a different WiFi network? If you’re unsure, just say “Hey Siri, what’s the weather like today?” and Siri will alert you that there’s a problem with the internet connection.
With recent updates to HomePod and your iPhone , iPad , or iPod, HomePod automatically connects to the same Wi-Fi network that your iPhone, iPad, or iPod is connected to.
Also Read: Why iPhone alarm not going off?
◆ How to fix homepod not responding?
If the Apple HomePod stops responding to commands or has other issues, the smart speaker can be reset to work again. When developing the HomePod, Apple focused on making the smart speaker particularly easy to set up. And setup is really simple: just hold the iPhone next to the HomePod, wait for the pop-up, follow the instructions, and you’re done.
Unfortunately, things don’t always go so well and sometimes the smart speaker may even refuse to work. Afterwards, it is often useful to reset the HomePod. Now you will find out how it works
Try a reboot first
If you reset your HomePod, the smart speaker will be restored to factory settings. Your entire HomePod configuration will be deleted. Apple therefore recommends resetting the HomePod only in the following cases:
- You want to factory reset HomePod.
- You must send the HomePod for repair.
- You want to sell the HomePod or give it away.
If your HomePod stops responding to commands, restarting the speaker may help. You can do this in two different ways: either you disconnect the HomePod from the mains and reconnect it after a short time, or you initiate the restart via the Home app on the iPhone. To do this, open the Home app, hold the “HomePod” entry, then tap Settings. Then scroll down, select “Reset HomePod” and tap “Restart HomePod”.
Here’s how to reset your HomePod:
To reset the HomePod to its factory settings, all you have to do is remove the speaker from the Apple Home app.
If restarting doesn’t bring any improvement, you’ll need to reset the HomePod. You can also choose between two reset methods:
- Open the Home app on your iPhone or iPad.
- Hold HomePod, then tap Settings.
- Now scroll down and tap on “Delete device“.
If you’re using your HomePod in combination with an iMac or MacBook, you can also reset HomePod through the Home app. It works the same way as the iPhone:
- Open the Home app on the Mac.
- Double-click “HomePod”.
- Scroll down and click on “Delete device”.
If the HomePod can’t be removed from the Home app, you can also reset it by tapping the top of the device. It works like this:
- Unplug HomePod and wait five seconds before plugging it back in.
- Wait another five seconds, then press and hold the top of HomePod.
- The rotating white light should then glow red. Keep pressing on top.
- Siri will now tell you that your HomePod will be reset. After three tones have played, you can release the top of the device.
If you continue to have problems after resetting the HomePod, unfortunately you have no choice but to have the smart speaker repaired by Apple. You can find important customer support information on this website.
- Before resetting your HomePod, you should first check if restarting will fix the problem. To do this, you must either disconnect the device from the mains or restart it via the home application.
- If restarting doesn’t help, you can hard reset the HomePod. To do this, remove the “HomePod” entry from the Home app or press and hold the top of the speaker for a while.
- If the factory reset doesn’t work either, you’ll need to ask Apple to repair the HomePod.
I’m sourav, from Kolkata. A tech lover and love to answer any tech-related queries. I just try answering all questions like my problem.